The AcrEase Finish Cut Mower Features

<< Home

<< Products

<< Features & Options

<< Distributors

<< Contact Us

<< Order Parts

<< Questions & Answers

<< Download Manuals

<< Warranty Registration

<< Company History

FEATURES
THE ACREASE FINISH CUT MOWER FEATURES

The AcrEase Finish Cut Mowers feature the following:

1. Large Engines - The AcrEase Finish Cut Mowers come with large 17.5-18 HP electric start engines. Both commercial and non-commercial grade engines are available.
18 HP Kohler commercial grade engine on the model C60K and Pro60K.	17.5 HP Briggs & Stratton non-commercial grade engine on the model H60B.

2. Blade Spindles - The blade spindles used on the AcrEase are built out of heavy duty welded steel hubs, 25 mm (1") shafts and large greasable bearings.
Heavy duty blade spindles.

3. Height Adjustment - The cutting height is easily adjusted from 1.5" - 5" by turning two cranks on the Pro60K model. The models C60K and H60B feature a 4-point height adjust system that has a cutting height range of 1" - 4".
2-crank height adjust system on the model Pro60K.	4-point height adjust system on models C60K and H60B.

4. Deck Design - The AcrEase deck is the heaviest built in the industry. The main deck on the models Pro60K and C60K is built out of 10 GA (.135") thick steel with a 7 GA (.179") thick steel top reinforcement plate. The main deck on the model H60B is built out of 11 GA (.120") thick steel with an 11 GA (.120") thick steel top reinforcement plate. The deck design also features a wide side discharge, deep deck design and 3-20" blades which are inline. All of these features increase capacity and cut quality. Other standard features are 6 anti-scalp wheels and a front and rear safety zone.
Heavy duty deck design with additional reinforcement plate.	Deep deck design with wide side discharge and inline blades for added capacity.	6 anti-scalp wheels located in front and rear safety zones.

5. Low Profile Design - The low profile design of the AcrEase makes it very easy to mow under low branch trees. There is no need to get beat by branches when the AcrEase is attached to the side of the tow vehicle.
Evergreen trees can be tough to mow around but not with the AcrEase.	Trim work around bushes can be virtually eliminated.

6. Blade Engagement - The model Pro60K is equipped with an electric clutch for blade engagement. The models C60K and H60B are equipped with a centrifugal clutch for blade engagement. The centrifugal clutch is engaged by simply increasing the rpm of the engine.
Electric clutch engagement switch on the model Pro60K.	Centrifugal clutch on the models C60K and H60B.

7. Hitching - The AcrEase Finish Cut Mowers have two different types of hitching available. These are the Lawn & Garden Hitching which works best with riding mowers and zero turn mowers and the ATV Tongue which works best with tow vehicles that do not have their own mowing deck. With the Lawn & Garden Hitching there are a variety of ways that multiple wing mowers can be pulled.
Standard Lawn & Garden Hitching for a single offset AcrEase.	Lawn & Garden Hitching configured for one of several ways to pull multiple AcrEase.	ATV Tongue can be quickly converted from offset to direct behind pulling.

8. Large Gas Tank - The AcrEase uses a 3 Gal gas tank that provides about 3 - 3-1/2 hours of run time.
Large 3 gal. gas tank.

Home Page , Products , Features and Options , Distributors , Contact Us , Order Parts
Questions and Answers , Download Manuals , Warranty Registration , Company History
Contact us at: info@kunzeng.com